Guide · Clock-in

A clock-in app that hates buddy-punching.

GPS geofence, QR code or NFC tag — and a scan can require GPS as well as the tap. Honest hours, captured at the bar or kitchen pass, fed straight into your payroll export. The end of the Sunday-morning timesheet hunt.

What it is

Clock-in app, defined.

A clock-in app is software that records when staff start and finish each shift, replacing paper timesheets and spreadsheet-based hour tracking. For hospitality, the best clock-in apps run on a shared tablet behind the bar or in the kitchen — the bartender taps their face, hits clock in, gets back to pouring. At the end of the week the recorded hours feed straight into the payroll export, no re-keying.

The reason it matters: even a five-person team running on paper timesheets loses a few hours a week to estimation, illegible handwriting and the staff member who "forgot" to write down their start time. Over a year that's the difference between a profitable Q1 and a "we'll catch up in summer" Q1.

The six features

What a hospitality clock-in app should do.

1 · Multiple verification methods

GPS geofence, QR code at the till, NFC tag. Three methods, chosen per venue and combinable, so you don't pick a tech you'll outgrow.

2 · Geo-fence

Optional GPS perimeter — clock-in only works inside the venue postcode. Stops the "I clocked in from home" claim before it lands.

3 · Anti buddy-punching

Require GPS alongside the QR or NFC scan. The tag proves someone tapped at the till; the geofence proves the phone was at the venue. Together they close the gap either leaves open.

4 · Forgotten clock-out catcher

A nudge goes to the staff member 15 minutes after their shift should have ended; a still-open session is auto-closed two hours later and dropped into the manager's discrepancies queue. Punches are append-only, so a correction is recorded, never overwritten.

5 · Hours feed payroll directly

Clock-in/out timestamps × hourly rate = wages. Labour-cost % calculated against today's takings. CSV export ready for your payroll provider.

6 · Mobile or shared tablet

Staff use their own phone, or share a venue tablet near the door. The shared-tablet flow is the one that actually gets used in busy bars.

Buddy-punching, ranked

Three ways to stop the friend-of-a-friend clock-in.

In strength order, and they combine. For almost every venue, a QR or NFC scan with GPS also required is enough.

1 · Geo-fence (GPS perimeter)

Clock-in only works inside a defined radius of the venue. The "I clocked in from home" defence collapses. On its own it can't tell two people apart inside the building, which is why it pairs with a scan.

2 · QR code at the till

A printed code behind the bar, scanned to clock in. The venue's QR secret can be rotated from settings — reprint the code and every photograph of the old one is worthless. Cheap: no hardware beyond a printer.

3 · NFC tag

Each staff member gets a physical NFC tag (key fob or card). Tap to clock in or out. Highest friction to fake — has to physically be at the venue, has to physically hold the tag. Overkill for most pubs; standard for larger hotels.

How Hospitality App does it

Clock-in built into the same app as the rota.

GPS geofence, QR and NFC — three methods, configurable per venue and combinable, with an optional “also require GPS” on top of a scan. Hours feed the payroll export and the labour-cost % automatically. Clock-in is part of time & attendance, included on every plan from £49/venue/mo on Essentials; payroll reports and the CSV export start on Professional (£99). Full pricing.

Start free trial See payroll detail
FAQ

Clock-in apps, asked & answered.

What is a clock-in app for staff?

Software that records when staff start and finish each shift, replacing paper timesheets. The best hospitality clock-in apps run on a shared tablet behind the bar and feed hours straight into payroll.

How do you stop buddy-punching?

Geo-fence (GPS perimeter), QR code at the till, NFC tag (highest friction) — and a scan can require GPS as well. Two or three combined defeats almost all attempts.

Is a digital clock-in legal in the UK?

Yes. Working Time Regulations 1998 require adequate records, but don't mandate paper. Digital with tamper-evident timestamps is widely accepted by HMRC and ACAS.

How does the clock-in app feed payroll?

Timestamps × hourly rate = wages. CSV export ready for any UK payroll provider. Labour-cost % calculated live against takings.

What if a staff member forgets to clock out?

Auto-flagged 30 minutes after scheduled shift end; manager edits from the inbox, edit logged with who and when.

Related guides

Read next.

Hospitality rota app

The scheduling end of the same data — clock-in records prove the rota was worked, the rota feeds the schedule clock-in expects.

Read the guide

Pub rota software

Role chips, sports-event templates and licensing on file — for pubs specifically.

Read the guide

Restaurant staff scheduling

Kitchen + FOH on one rota, role-aware templates, swap inbox.

Read the guide
Open in 10 minutes

Take honest hours tonight.

Sign up free, set the venue's clock-in method, watch the timesheet build itself. Sunday morning gets shorter.

Start free trial